Material: MS modified silane polymer Capacity: 12g Appearance: Paste (white or transparent) Curing mechanism: moisture curing (relying on moisture in the ai r to promote curing) Face dry time: 20 minutes (spray a little water can accelerate the curing time) Follow-up operation: press tightly (fixed with auxiliary stickers or double-sided tape for more than 2 hours) Specific gravity (density): 1.52g or ml Hardness: 55 percent Maximum deformation: ±20 percent Elastic recovery rate: 80 percent Temperature (after curing): -45℃and90℃ Elastic modulus 100 percent : 3.0N or mm² Tear strength: 3.8N or mm² Tensile modulus at break: 200 percent Home Improvement: ceramic tile or glass or latex paint face or marble or granite or concrete face or gypsum board or rock wool or wood, etc. Metal: aluminum or steel or copper or iron or zinc, etc. Plastic: PC or PVC or GPPS or PMMA or PS or EVA or PET, etc. Environment: Humid environment (bathroom or kitchen), outdoor (anti-ultraviolet or low temperature), high temperature (automobile or industrial factory) Specifications: Widely used and easy to operate It has a waterproof effect, moisture resistance, cushioning and the like. Non toxic, solvent-free, non-polluting, non-corrosive, anti aging Application: frosted glass, marble, lacquered wood, soft metal plates, tiles, mosaics. It is best to use an invisible wall mount. More sticky, no safer nails, high strength, quick-drying glue, no noise, environmentally friend