1. Bending sensor. The degree of bending of the sensor can be translated into a change in resistance value. The more the bend, the higher the resistance. This sensor can be used to make an energy glove<br> 2. Bending direction: the side with the word is the inner side when bending. Avoid bending the end pin portion (i.e. the part that is not bent) during use, as damage may result<br> :<br> Model: Flex Sensor 4.5inch / 2.2 inch<br> Technical Specifications Straight Resistor: 25K ohms<br> Resistance Tolerance: +30% Bend<br> Resistance change: 60K-110K ohms<br> Rated Power: 0.5 Watt Peak Power: 1 Watt<br> Bending life: Greater than1 million times<br> Working temperature: 35°C~+80°C<br> Interface type: 2-pin metal pins (0.1 pitch)<br> Torque sensor, for electronic gloves. When the sensor's metal bends outward, the resistance of the sensor changes and the bend can be detected.<br> Non-bending state resistance: -9000 ohms<br> 90 degree bending resistance: 14000 ohms<br> 180 degree bending resistance: 22000 ohms<br> Principle: Current Sensor<br> Application: pressure sensor<br> Type: Vibration Sensor<br> Output: Analog Sensor<br> size: 11 x 1 x 1cm / 7.5 x 1 x 1cm<br> Material: ABS<br> colour: yellow<br> Package Contents:<br> 1 x Flex sensor<br> Only the above package content, other products are not included.<br> Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.