100% assurance tested, more responsive, less expensive, easier to install.Unique steel template is included which greatly improves cut out accuracy.On K-swapped without heater cores and top mounted shifters, people would pass the shifter cables somewhere through the firewall.Sometimes the existing hole for the heater core is used and sometimes people prefer to drill a new hole slightly lower on the firewall. Either way works fine you are always left with some ugly space around the cables after installation.The Cable Grommet has a billet frame with a 7/16inch thick rubber grommet in it.Simply drill 4 holes in the corners of the frame and fasten in place with the included hardware.Application:For 92-00 .For 94-01 .For K-Series motors,such as K20 K20a2 K20z(DC2/EG/EK, or RSX Box)Great for and anywhere shifter cables are passed through a firewall.Material:aluminumcolour:Silver + blackPackage Contents:1 * shifter cable grommet kit4 * sets of screwsOnly the above package content, other are not included.Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.