100a Digital Lcd Double Pulse Encoder Spot Welder Machine Time Control Board

MYR84.00
+ MYR41.99 送货

100a Digital Lcd Double Pulse Encoder Spot Welder Machine Time Control Board

  • 品牌: Unbranded

100a Digital Lcd Double Pulse Encoder Spot Welder Machine Time Control Board

  • 品牌: Unbranded
价格: MYR84.00
由……售出:
MYR84.00
+ MYR41.99 送货

有货

我们接受以下付款方式

描述

III. Usage :Voltage calibration:The module has voltage compensation function, so the voltage calibration must be carried out when the first machine is installed, and in the , as long as the module power transformer is not replaced, there is no need to recalibrate. Of course, when you feel that the display voltage is wrong and it can be calibrated. The following are the mains voltages that are not calibrated and displayed during operation Pay attention to the safe use of the high voltage part during installation. When the usage frequency and power are high, silicon control rectifier requires external radiator to disspate heat.The power of the module driving load depends on the power of silicon control rectifier (SCR). BAT41 (40A) can carry a microwave oven transformer, BAT100 (100A) can carry two microwave oven , and the recommended one for Loop transformer is 100A. Precautions for use:This module DIY needs to have certain electrician knowledge, if you are complete freshman, please refer to the electrician's knowledge before you start. Do not know the welding time and power of the welded parts, it is recommended that the welding time and power be adjusted from small to upper to avoid damage to the welding pen.Fault cause and troubleshooting,The electricity supply does not match the actual electricity voltage: re-voltage calibration. The solder joint is not secure or soldered: adjust welding time and power until satisfactory results are achieved.Can be set to save the last operation, the module double pulse trigger, turn off any set of trigger time, you can change double pulse to single pulse trigger.The main board and the display operation panel are separated, and the outer casing can be flexibly assembled. With grid voltage compensation, the output of compensation can be automatically adjusted according to the change of power supply, and the electric voltage of about 1 second can be displayed when triggered, so that the effective heat of welding is consistent with the welding parameters, and the welding spot is uniform. DIY or simple battery welder development welding. Welding of a single battery or battery pack. Multi-group data 12864 visual display, intuitive operation, convenient, single encoder parameter adjustment can make the operation simple and fast. With 0-9999 welding counting function, with 5 groups of sample storage parameters, can be stored even the electricity power is off, the number of wleding could be seen just by a glance. Time input 0-99 cycle (1 cycle is 20ms, for example, the adjustment value is 50, which is the welding time 1 second.), the stop time between 2 weldings is 0-99 cycles (1 cycle is 20ms, such as interval value 50, It is the interval of 1 second.) adjustable. Welding strength 30%-99% is adjustable. The module can isolate the strong and weak electricity by optical coupling, and design a reliable circuit for zero-crossing detection and voltage detection to the accurate phase shift of silicon control rectifier (SCR), which can be compatible with 40A-100A bidirectional silicon control rectifier (SCR). 9-12 V AC power input (using AC , other such as DC, can cause zero-crossing detection failure, can not trigger.) colour:green Material:Metal + PC Package Contents: 1 * Main Board 1 * Display Board 1 * Cable Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • 品牌: Unbranded
  • 类别: 工具
  • Fruugo ID: 332504742-732785749
  • EAN: 9047435068411

产品安全信息

请参阅下面列出的特定于该产品的产品安全信息

以下信息由销售该产品的独立第三方零售商提供。

产品安全标签

CE Mark
安全警告:
  • Keep Away from Heat: Do not expose to open flames, sparks, or high temperatures
  • Avoid Direct Sunlight: Store in a cool, dry place
  • Handle Carefully: Do not puncture, crush, or disassemble.
  • Follow Storage Guidelines: Adhere to recommended temperature and storage conditions

配送 & 退货

在 24 小时内发货

  • STANDARD: MYR41.99 - 之间的交付 周四 16 十月 2025–周四 23 十月 2025

从 中国 送货。

我们会争取将您订购的产品按照您的规格完整地配送给您。不过,万一您收到不完整的订单,或收到的产品与您订购的不同,或者有其他原因让您对订单不满意,您可以要求全部或部分退货,您将收到相应产品的全额退款。 查看完整的退货政策

产品合规详细信息

请参阅下面概述的针对该产品的合规性信息。

以下信息由销售该产品的独立第三方零售商提供。

制造商:
以下信息概述了在Fruugo销售的相关产品的制造商联系信息。

  • Guangzhouruoxiahuahuiyouxiangongsi
  • Guangzhouruoxiahuahuiyouxiangongsi
  • Room 101, No. 5, 18th Lane, Zhusong Street
  • Huangpu District,
  • Guangzhou
  • CN
  • 510700
  • sjgdrp@outlook.com
  • 18923410357
  • https://www.fruugo.co.uk/guangzhou-ruoxia-huahui-youxian-gongsi/m-20965

欧盟负责人:
以下信息概述了欧盟负责人的联系信息。该负责人是位于欧盟的指定经济运营者,负责有关销售到欧盟的相关产品的合规义务。

  • E-CrossStu GmbH
  • E-CrossStu GmbH
  • Mainzer Landstr.69, 60329 Frankfurt am Main
  • Frankfurt am Main
  • DE
  • 60329
  • E-crossStu@web.de
  • 69332967674
  • https://www.dnb.com/business-directory/company-profiles.e-crossstu_gmbh.1c9aad5dc9bd55eb05eb6c8a6249315d.html