<ul><li>105° right angle drill/driver can be connected to the drill, rechargeable drill or manual wrench, which expands the reach for stencils, twist screws, nuts and more.< /li><li>105° design for tight spaces, increases the power of a cordless screwdriver – 100 in/lbs. Couple : 400 rpm. These tools are ideal for easy drilling, speed/slow screwdriving, such as cordless drills, ratchet drivers, etc.</li><li>105° angle extension in chrome vanadium steel, holder -High hardness drill bit and durable die-cast housing with 3 ball bearings for long life. Built-in strong magnet for good holding force, easy to use and prevent falling.</li><li>105 degree angle extension, 360° parallel adjustment, perfect and practical tool for hard to reach corners and narrow spaces, maximum torque of 15 n/m.</li><li>3 socket adapters for the installation of pneumatic screwdrivers, electric screwdrivers, pneumatic drill, manual screwdriver and other installations for the hex tool. It is a good accessory for adapter and drive reducer conversion kit. </li></ul> <b>:</b> ① Corner Extension. 1/4" Hex Driver Extension, Convenient, durable, easy to use. It is good for wrenches and drills, rechargeable drills or a manual wrench. Light weight, quick, plugs into a standard hex screwdriver. Function head with locking and magnetic function, 105 degree right angle head. Features: Material: stainless steel. Dimensions: 5.9 x 3 cm. Colour: Silver. Torque Capacity: 16N. It only allows 1/4 hex bits. Not suitable for hammer drills. ② Over 1/4 inch adapter / extension kit Suitable for hammer drill systems. Quick Change 1/4" chuck or directly into the chuck. Turns any power drill into a Power Mother driver. Convenient for quick driving of nuts, screws and fasteners etc. > Spring-loaded ball bearing on head to keep sockets firmly in place. Widely used in DIY, kitchen, car parts, specialized in machinery repair, etc. Features: Weight: approx 100g. All standard sockets 1/4" hex shank. Dimensions: 1/4 x 1/4 x 65mm length - The shank 1/4" can be converted to 6.35mm square head. 3/8 x 1/4 x 65mm length - 1/4" shank can be converted to 9.4mm square head . 1/2 x 1/4 x 72mm in length - 1/4" shank can be converted to 12.6mm square head. Contents: 1 adapter (shank 1/4" hex to 1/4" socket. 1 x socket adapter (1/4" hex to 3/8" socket). 1 x adapter (1/4 hex " to 1/2" socket. 1 x 105° Angle Hammer Adapter. Note: The data is all manual measurement, please allow 1-3cm error ;due to the light and display difference, there would be a certain color difference, please refer to the actual object received.