Features: 1.Display mode -TFT,The input data SPI interface 2.Drive IC ST7735S,Resolution 128RGB x 160 points 3.Active area LCD 28.03 (W) x 35.04 (H),Pixel size 0.219 (W) x 0.219 (H) 4.Display direction At 12 o'clock 5.Operating temperature -20-70 C Description: 1. Size: 3.5 x 5.6cm 2. Control Chip: ST7735 3. Resolution: 128 x 160 4.Display Area: 28.03 X35.04 (mm) 5physical Size: 35 x 56 (mm) 6. Interface Type: Spi Interface 7. Number Of Pins: 8PIN 8. Display Color: Full Color 9.Pixel Size: 0.219 X 0.219 (mm) 10. Working Temperature: -20~70 Degrees 11. Working Voltage: 3.3V PIN No Symbol Description 1.GND Soil 2. Power 3.3 V 3.SCL Series watch Pin 4.SDA Data Entry Series 5.RES LCM Reset Pin This Pin Is Resetting The Signal Input. When The Pin Is Low, The Initialization Of The Chip Isexecuted Keep This Bolt High During Normal Operation. 6.DC Data / Control 7. Chip, Select 8. Control Pin Background Color: As Shown Material: PCB+metal Package Contents: 1 x Serial Port Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.