and waterproof. the need for tapping wires to install the load resistors Allow LED bulbs to blink at the normal rate Easy to use, directly replace the two-pin flasher Can use a flat head screw driver to adjust the knob on the bottom to set its flashing speeds from 50c/m to 200c/m. Suitable for most Motorcycles such as , , , , etc.<br><br>PIN: 2 Operating Voltage: 12V Max Power: 42W Switch Power: 0.02A to 12A Flashing Frequency: 50 times/min to 200 times/min Working Temperature: -40°C to +80°C Installation Tips: 1.Installation must be on the good foot position,otherwise the flasher can not work. 2.B pin is input, L pin is output. Note:Please be careful when adjusting the speed. Material:ABS colour:black<br><br>Package Contents: 1 x Can FM Flasher<br><br>Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.