Very simple small device with 1 input and two outputs, using a button switch to direct the input signal to either output. Passive design with all gold-plated XLR sockets; the switch is a single-pole double-throw XLR 123 pin. Optimized for noise-free switching with non-common ground design. Simple and intuitive layout for condenser or dynamic microphone signal switching. No power supply required. Can be used with o sources such as computer, mixer, sound card, wireless microphone, or wired microphone for signal routing or talkback applications. Quickly re-route your microphone signal—connect output A to a stage sound reinforcement system and output B to a public or internal communication bus. Zero latency, studio-grade balanced XLR output jacks enable lossless, seamless switching. Note: Since condenser microphones require 48V phantom power, a pop or thump may occur when switching during use. Interfaces: 2 male XLR outputs 1 female input: 6.5mm TRS + XLR Color: Black Material: Aluminum alloy Package Contents: 1 x o Switch Note: Light reflection and different display settings may cause slight color variations between the image and the actual item. Measurement error allowed within +/- 1-3 cm.