AC 220V 1/2 inch 2-Way Electronic Timed Compressor Gas Tank Automatic Drain Valve Electronic Drain Valve with LED Indicator Light for On/Off Status Voltage Range: ±10% of Supply Voltage Protection Rating: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Temperature: 90°C Ambient Temperature Range: -40°C to 60°C Maximum Current Consumption: 4 mA Supply Voltage: 24–240V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 Seconds Time Interval (OFF): 0.5–45 Minutes Ideal for Use in Filters, Separators, Dryers, Gas Tanks, Drip Legs, and Other Compressed Air System Components Clean the Compressed Air System Before Installation Observe Correct Flow Direction During Installation – Outlet Must Not Be Blocked Ensure Supply Voltage Matches Drain Valve Voltage Requirements When Using DC Power, Connect Positive Pole to Terminal "1" Factory-Wired Cable: Brown Wire = Live (L), Blue Wire = Neutral (N), Yellow-Green Wire = Ground (GND) Tighten Terminal Box Screws Securely to Prevent Water Ingress and Damage Warning: Ensure System is Depressurized and Power is Disconnected Before Installation Color: Gold + Black Material: Metal Aperture Size: 5 mm Port Size: 1/2 inch NPT Package Includes: 1 x Electronic Drain Valve Note: Other Accessories Are Not Included Note: Monitor Display and Lighting Conditions May Cause Slight Color Variations Compared to Actual Product Measurement Tolerances May Vary by ±1–3 cm