Syc6714+ Often Uses A Synchronous Controller To Control Synchronization In The Generator Parallel Control Cabinet, And A Synchronization Meter Is Installed On The Panel To Display The Synchronization Angle. The Tracking Synchronization Meter Is A New Type Of Modern High- Product. Functionally, It Is A Combination Of A Synchronization Meter And A Synchronization Controller. When The Tracking Synchronization Meter Is Used In The Generator Parallel Control Cabinet, There Is No Need To Install A Synchronization Controller, Which Greatly Reduces The Cost. The Material Cost Of The Generator Parallel Control Cabinet Is Reduced. It Can Simplify The Wiring And Reduce The Production Cost Of The Generator Parallel Control Cabinet.Improved The Reliability And Accuracy Of The Generator Parallel Control Cabinet.In Addition, The Synchronization Angle Of The Synchronization Table And The Related Information Of Synchronization Control Are Displayed By Led, Which Is Beautiful And Clear. Sync: Lights Up When The Synchronization Angle Difference Is Less Than The Preset Angle.Dc Power: Lights Up When The Power Supply Is Turned On.Mains: Illuminates When Power Is Applied To The Power Grid Or Busbar. Enabled: Illuminated When Synchronization Is Permitted 36 Arranged In A Circle: Synchronization Angle Difference Display, When Synchronization, Synchronization Angle Difference Is Close To 0 Degrees, The Top Green Led Lights Up, If The Generator Is Ahead, The Synchronization Angle Difference Is Positive, Led Along The Too Fast Direction Lights Up, Every Interval Of 1 Led, That Is, The Synchronization Angle Difference Increases By 10 Degrees; If The Generator Is Lagging Behind, The Synchronization Angle Difference Is Negative, Led Along The Too Slow Direction Lights Up, Every Interval Of 1 Led, That Is, The Synchronization Angle Difference Decreases By 10Degrees. If The Generator Lags Behind And The Synchronization Angle Difference Is Negative, The Led Lights Along The Too Slow Direction, And Every Interval Of 1 Led Indicates That The Synchronization Angle Difference Decreases By 10 Degrees. (If The Frequency Of The Generator Set Is High Or Low Relative To The Grid Or Bus, The Synchronization Angle Difference Will Rotate Clockwise Or Counterclockwise.) Breaker Closerelay: Lights When The Synchronization Angle Difference Is Less Than The Preset Angle And Synchronization Is Allowed, And Outputs A Synchronization Closing Signal At The Same Time Gen: Lights Up When Generator Has Power Output. Colour:As Shown Material:plastic Size:about 9.7 x 9.7 x 7.5cm Package Contents: 1 x SYC6714+ Generator Accessories Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-YJL official store