LCD Screen to Show Water Temperature - The faucet has a beautiful, easy to read and large LCD screen that displays the water temperature during use. Thanks to the display, you always know what temperature is poured directly into the sink, and you can adjust this temperature freely. The screen displays the water temperature from 30 degrees to 60 degrees. Excellent workmanship: The faucet is waterproof at level 1 and waterproof according to IPX4. The faucet is equipped with an aerator to aerate the water. The power of 3000 W allows very strong pressure and rapid heating of the water. The water pressure is between 0.3 and 0.5 MPa. It is an ideal alternative to expensive boilers and radiators. Solid construction - The extension is made of stainless steel, which makes it very durable, resistant to mechanical damage and it will serve for a long time. Chrome finish of the extension will suit the majority of kitchens and give them added appeal. The diameter of the tap connection is even 1.5 cm and therefore it fits the majority of taps located in households. Easy assembly: to mount the tap, you must first unscrew the battery strainer, then adjust the threads in the faucet to the threads in the extension. Later, you need to attach the gasket and screw the element to the faucet. It is worth paying attention so that the joint is not displaced during assembly. Screwing the extension must be carried out using the adjustable distance wrench. Don't forget about cleanliness Before assembly, you must clean exactly where the faucet is mounted. For assembly, it is recommended to use the gaskets and this will increase the longevity of the extension. Before screwing, you must dry the exact mounting location. Forget non-adjustable cleaning and descaling, especially if the water is hard in your area. In the set there are assembly instructions.