Feature:1. 300W 20A: The MPPT photovoltaic controller uses solar maximum power point tracking (MPPT) technology. 300W output power, 20A load discharge current.2. High Efficiency: The photovoltaic solar controller adopts a high efficiency synchronous rectification circuit structure. Performance upgrade, efficiency improvement.3. Multiple Protections: Short circuit protection, over temperature protection, solar input undervoltage protection, battery undervoltage protection, load port short circuit protection.4. Applications: Photosensitive solar controller, no output during the day, load output at night, suitable for street lights. Energy saving and environmental protection.5. Installation Attention: The output and input lines can be connected and installed according to the applicable voltage. There is high voltage and high current in the machine, and non professionals are not allowed to disassemble.Specification:Item Type: MPPT Solar ControllerMaterial: PlasticGross Weight: 306g / 10.8ozProduct size: 74x74x32mm / 2.9x2.9x1.3inLoad Discharge Current: 20AOutput Power: 300WPhotosensitive: No output during the day, load output at night, suitable for street lampsEfficiency: 95%Noise: <55dBApplication: Solar street light controller sceneNo Load Loss: 30MAVoltage Regulation Rate: 1%Load Regulation: 5%Full Load Ripple: 400mVNo Load Ripple: 100mVDischarge Module Input Voltage: Equal to battery voltageLoad Output Voltage: Equal to battery voltageLoad Output Current: 30A (Max 32A)Static Power Consumption: 12mALoad Output Mode: PhotosensitiveBattery Terminal Short Circuit Protection: YesLoad Short Circuit Protection YesTemperature Protection: YesProtection Class: IP67Working Temperature: -40-+65.Package List:1 x Solar Charge ControllerNote:1.The MPPT controller should be fixed on an iron or metal bracket to avoid the vibration of the machine due to instability.2.The MPPT controller should allow some space around the enclosure.3.Output and input wires should be kept as short as possible to avoid excessive energy dissipation during transmission.4.There is high voltage and high current in the machine, and nonprofessionals are not allowed to disassemble.5.The input and output terminals should be reliable and not loose, so as to avoid heating at the connection point.