Voltage: 36V Rated power: 1000W Compatible with: 700-1000W motor Color: Silver Material: Metal Controller wiring instructions: 1. To enable the motor to operate, first connect the four main connectors. Connect the two thicker blue and white wires from the controller to the motor. The blue wire connects to the red motor wire, and the white wire connects to the black motor wire. 2. Next, connect the two red and black wires from the controller to the battery. The red wire connects to the battery positive terminal, and the black wire connects to the negative terminal. 3. Then, connect the speed controller to the corresponding terminals. The speed controller has three wires: connect the red wire to the red terminal, the black wire to the black terminal, and the remaining wire accordingly. After connecting, unlock the electric lock. Once powered, the motor will be ready to run. Note: Do not connect the power wires incorrectly, as this may damage the controller. Product appearance, text, and color may vary slightly between batches, but this will not affect functionality. Package Contents: 1 x Brushed Controller Note: Light reflection and differences in display screens may cause slight variations in the color of the item shown in the image compared to the actual product. Measurement error allowed is +/- 1-3 cm.