Specially optimized algorithm firmware enhances the hashrate to 411KH/s, increasing the probability of winning the lottery by 680% (Nerdminer v2 only 55KH/s). The display will turn off after 1 minute without operation, and you can wake up the screen by pressing any key to avoid light pollution. By double-clicking the USER key, allows you to switch to a desktop clock mode with the BTC Lottery runs in the background. ESP32-WROOM-32 Module, support Wi-Fi and BLE. Optimized Software that achieves a higher Harshrate of 411KH/s. Standalone: can work as a BTC lottery miner directly over WiFi. No External computer is needed. Embedded: low cost, low maintenance, high availability, high reliability, low power. Versatile: solo/pool mining. ESP32-S3R8 MCU wifi microcontroller on board. Master Chip: ESP32-WROOM-32 Wi-Fi: 802.11 b/g/n Bluetooth: Bluetooth LE: Bluetooth 4.2 Hardware Resource: UART, SPI, SDIO, I2C, PWM, I2S, ADC Memory: 384KB ROM; 512KB SRAM; 16KB RTC SRAM; 8MB SiP Flash Interface: Type-C USB; GPIO: 22 Antenna Gain: Board Antenna, 2dBi The product appearance and printed words may vary depending on the batch, but this does not affect use Colour:As Shown Material:PCBandPlastic Package Contents: 3 x Lotto Machine 3 x USB Cable(The color of the data Cable is random, no specified color is accepted) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.