3Pcs Bluetooth Module Ble Bluetooth Serial Port Module Compatible With Cc2541 Slave

RM139.00
FREE Shipping

3Pcs Bluetooth Module Ble Bluetooth Serial Port Module Compatible With Cc2541 Slave

  • Brand: Unbranded
  • product image
  • product image
  • product image
  • product image
  • product image
3Pcs Bluetooth Module Ble Bluetooth Serial Port Module Compatible With Cc2541 Slave

3Pcs Bluetooth Module Ble Bluetooth Serial Port Module Compatible With Cc2541 Slave

  • Brand: Unbranded
RRP: RM249.00
Price: RM139.00
You save: RM110.00 (44%)
Sold by:
RM139.00
FREE Shipping

In stock

14-Day Returns Policy

Payment methods:

Description

3Pcs Bluetooth Module Ble Bluetooth Serial Port Module Compatible With Cc2541 Slave

Description: Communication interface: serial port. Working voltage: 1.9-3.6V. Communication distance: 100 meters. Working current: 90ua. Suspen mode: 14 uA. Module is: Bluetooth 4.0 slave. JDY-10 transparent transmission module is based on Bluetooth 4.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, maximum transmission power is 8db, maximum transmission distance is 80 meters, low power consumption, small size, strong signal, data transmission Stable and other characteristics. Features: 1: Support Android, IOS mobile phone data penetration. 2: Support low power consumption (standby current can reach several uA). 3: Support GPIO and UART peripheral interface. 4: Support AT command operation. 5: Can be certified by FCC/CE and other standards. Product application range: 1: Bluetooth LED lighting. 2: Motor adjustment and other products. 3: Anti-lost alarm and other products. 4: Sports Health Care. 5: Small appliances. 6: Automotive Electronics. Specifications: Working voltage: 1.9 3.6V. Operating temperature: -40 - 85C. Maximum transmit power: +8dbm. Antenna: PCB onboard antenna. Receiving sensitivity: -92dbm. Average current: Wake mode: 90uA. Suspenmode: 14 uA. Deep Sleepmode: 1uA. Factory default configuration: Service UUID: FFE0. Feature UUID: FFE1. Serial port baud rate: 115200bps. AT instruction set: Users can communicate with the Bluetooth chip through the serial port. The serial port uses Tx, Rx two signal lines, and the baud rate is supported. Hold 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200. The default baud rate of the serial port is 115200bps. Instruction set details: (Note: You must enter and enter the line when you send the AT command. The AT command can only take effect when the module is not connected. Once the blue is enabled. When the tooth module is connected to the device, the Bluetooth module enters the data transparent transmission mode). Detailed instructions: (AT commands are case sensitive and end with carriage return, newline characters: rn) 1. Get the version number: command:AT+VER. response:+. parameter:version. Default: +JDY-10-V1.8. 2.Get the Bluetooth MA C address: command:AT+MA C. response:+MA C. parameter:MA Caddress. 3.Set the Bluetooth name: command:AT+NAME. response:OK. parameter:Bluetooth name. Default name: JDY-10. Up to 18 bytes. 4.Set / query - transmit power: command:AT+POWE. response:OK +POWE. parameter:(0-5) 0: 8db. 1: 5db. 2: 0db. . 3:-5db. 4: -10db. 5: -13db. 5. Set / query - serial port baud rate: command:AT+BAUD. response:OK,+BAUD. parameter:(0-7) 0: 115200 bps. 1: 57600 bps. 2: 38400 bps. 3: 19200 bps. 4: 14400 bps. 5: 9600 bps. 6: 4800 bps. 7: 2400 bps. 6.Set / query - broadcast interval: command:AT+ADVINT. response:OK,+ADVINT. Parameter:(0-6) 0: 100ms. 1: 100ms 2: 250ms. . 3: 500ms. 4: 1600ms. 5: 3200ms. 6: 4800ms.
  • Fruugo ID: 346135672-757163772
  • EAN: 9070124575853

Product Safety Information

Please see the product safety information specific to this product outlined below

The following information is provided by the independent third-party retailer selling this product.

Product Safety Labels

CE Mark
Safety Warnings: Important Safety Instructions Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction. General Warnings Intended Use: Use this product only for its intended purpose as described in the user manual. Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision. Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged.

Delivery & Returns

Dispatched within 24 hours

  • STANDARD: FREE - Delivery between Fri 02 January 2026–Mon 12 January 2026 - FREE

Shipping from China.

We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items. View full return policy

Product Compliance Details

Please see the compliance information specific to this product outlined below.

The following information is provided by the independent third-party retailer selling this product.

Manufacturer
The following information outlines the contact details for the manufacturer of the relevant product sold on Fruugo.

  • DINHAN TRADING (HK) CO., LIMITED
  • DINHAN TRADING (HK) CO., LIMITED
  • CN-NO 12, UNIT D, 3/F,, WONG KING INDUSTRIAL BUILDING,, 2-4 TAI YAU STREET,, SAN PO KONG
  • HONG KONG
  • china
  • 999077
  • dinghan@hotmail.com.hk
  • 86-18072455752

Responsible Person in the EU
The following information outlines the contact information for the responsible person in the EU. The responsible person is the designated economic operator based in the EU who is responsible for the compliance obligations relating to the relevant product sold into the European Union.

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • C/Gran Vía 49,7DCH
  • Madrid
  • Spain
  • 28013
  • ecrepservice@hotmail.com
  • 34 910563102