433mhz Fixed Learning Code Remote Controls Duplicator Key Fob Distance

Descriptionbr 100 New and High Qualitybr 1.Code cleaning methodbr Press the unlock button and lock button at the same timesome shells are the up button and down button, after the LED indicator light flashes three times, loosen one of the buttons while the other is kept pressing, then push the released button three times, the LED indicator will enter into the fast flashing status. At this time all the memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press.br 2. methodbr One hand keeps the original remote controller, while another keeps the remote control, the two remote controls should be placed as closely as possible the ideal situation is to put the two remote controls on the desktop side by side with zero distance, respectively press down the button, when the LED indicator light flashes quickly after three flashes, this is successful, other key operating methods are the same. Some remote control has a smaller transmitting power, so the original remote control should be placed back to the remote control to be operated. For the presence of noise, it should avoid interference to operate, If the is not successful, it should recopy after clearing code.br Pls clear the testing code before .br Press the upper 2 buttons at the same time until the LED light flashes 3 times quickly, then release one of the buttons the other one keep pressing, and press this button 3 times, then release both buttons after the LED light fiashes quickly. The LED light doesn't turn on when you press button, that means you' ve removed the code.br Studying Code.br Press and hold one button on this remote, and also the same on your remote controller, make them close to receive the signal 3 seconds, LED light will quickly flash and then always on, then release the button . Try to press this button, LED light will be on, that means you have copied successfully. Do the same steps to other buttons.br Recovery function.br If you delete the useful codes accidently, you can press the 3& 4th buttons at the same time until the LED light flashes quickly 3 times then recover successfully.br Easy to use, the 4 channel remote control system lets you take control of your gadgets, car, home and garage.br This is not a complete listbr If your remote uses the 433MHZ frequency it will work with the remote duplicator note rolling code remotes will not work.br IC model of original remote control is 2262 2260 1527 2240 and compatible IC.br The battery used in the product is 27A 12V please replace the battery when the remote control distance is insufficient.br up to 4 remote signals from 4 different remotes.br With this remote control, you can control all 433MHz fixed code key fobs.br Some remotes that use this frequency are listed below.br 4-Channel RF Wireless Remote Control Duplicator for Cars, Garage Doors, Gate Doors, Alarm Systems etc. br This is a fixed frequency remote cloner 433mhz for copying common fixed an