描述
6 In1 Water Quality Detector Smart Online Bluetooth Water Chlorine Meter Ph Meter Powered Tool for S z
Feature: 1.6-in-1 Meter Bluetooth-compatibility: by mobile applications, it can professionally measure pH, ORP, chlorine, EC, TDS and temperature. It is applicable to domestic drinking water, hydroponics, laboratories and aquariums.
2.Cloud Data Management System: Accurate real-time Bluetooth data transmission, with clear measurement values. Allows you to save, manage, and share test data at your fingertips without worrying about data loss.
3.Automatic Calibration of pH Tester: High sensitivity glass probe is used. Compared with other pH meters, pH is a three-point calibration . Our pH is a five point calibration and is equipped with calibration powder (pH 4.00, pH 6.86, pH 9.18, pH 7.00, pH 0.01). You can calibrate to the accuracy of the measurement.
4.Comprehensive Information Display: Just immerse the pH meter electrode in the solution to be measured, and the reading can be quickly displayed on the APP. Multiple parameters are displayed at the same time, and the mobile phone APP controls the backlight display.
5.High Precision Water Quality Tester: The high-precision algorithm chip and electrode of our digital water quality tester accurate and fast response. The green backlight LCD design ensures that you can read the measurement results under any conditions.
Specification:
PH value range: 0.1-14.0
Resolution: 0.1ph
Precision: 0.1ph
Temperature range: 0.1 - 8.0 31.2 - 176
Resolution: 0.1 or 0.1
Accuracy: 0.5
EC range: 0-1999us or cm, 10.01-20.0mS or cm, 2000-10000uS or cm
Resolution: 1uS or cm 10uS or cm 0.01mS or cm
Precision: 2 percent F.S.
TDS range: 0-999ppm, 1000-9990ppt
Resolution: 1ppm 10ppm
Precision: 2 percent F.S.
range: 0.1-4.0mg or L
Resolution: 0.1mg or L
ORP range: 999mv
Resolution: 1mv
Precision: 15mv
Battery: 3 x AAA, excluding
Display: LCD digital display
Backlight: APP control
Temperature: automatic temperature compensation 0-60
Working environment: 0.1 - 80
Relative humidity: maximum 90 percent
PH calibration: PH: 6.86 or 4.00 or 9.18 or 7.00 or 4.00 or 0.01
Shell material: ABS
Size: About 160x90mm or 6.29x3.54inch
Color: As Shown
Material: plastic
Package Contents:
1 x Water quality detector
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.
Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
-
Fruugo ID:
439417180-921314737
-
EAN:
9316197173405