Description: This POE injector ethernet adapter is a good solution for you to save you trouble in power cabling and costs by simply connecting your POE or non-POE device with an Ethernet cable. This POE power supply module is compatible with all IEEE802.3af network devices, but it does not have auto-detection function. As long as they are connected, they can directly supply power to network devices. Features:4 or 8 enough channels meet the need that you are lacking of the ports.POE power supply module is compatible with all IEEE802.3af network devices, but it does not have auto-detection function.LED power light allows you to clearly know the working status.Same voltage to all ports, share available power equally.High stability and outstanding performance.Specifications:POE Port: Connect Bridge AP CPE device WAN interface (use with POE separation line)LAN port: Connect to a router Switch or directly connect to the host computer network interfaceDC socket: outside -5.5mm, inside and2.1mmPOE port: 4 or 5 pin (and), 7 or 8(-) LAN port = 1 2 3 6 pin for dataNote: The green terminal and the DC power supply voltage are connectedLine connection equipment to do line standards:Through 568B (positive line, direct line, standard 568B: both ends of the line sequence, from left to right line sequence is: white and orange, Orange, White and green, Blue, White and blue, Green, White and brown, Brown)Rated voltage (Nominal Voltage): 12-48V DCInput Current: 0-10AInput data transmission: 1 or 2 or 3 or 6 pinTransmission rate: 10 or 100MbpsOutput Voltage: 12-48V DCOutput data transmission: 1 or 2 or 3 or 6 pinOutput transmission rate: 10 or 100MbpsOutput transmission power: 4 or 5 positive electrode 7 or 8 negative electrodePort quantity: 4, 8 (optional)Package List:1 x 4 or 8 Channel POE Power Supply Module POE Injector Ethernet Adapter (Based on your choice)