868.3MHz Garage Door Remote Control Duplicator for HSM2 HSM4 868 Digital D302 382 BHS110 - Supports 868.3MHz frequency with face-to-face cloning for quick and easy duplication - Compatible with car and motorcycle alarms, home security systems, electric curtains, garage doors, parking barriers, and similar devices - Works with most fixed code and learning code remotes - Supports multiple chip types including PT2240, PT2260, PT2262, EV1527, FP527, AX5326, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC5026, SMC918, and others - Designed with precise buttons and a sleek, durable exterior for reliable use and modern appearance Programming Instructions: 1. Factory code reset: Press and hold the Arm and Disarm buttons simultaneously until the LED flashes three times. Continue holding the Arm button, release the Disarm button, then press the Disarm button three times slowly while the LED flashes. Release the Arm button. The factory code is now cleared. The LED should not flash when any button is briefly pressed. 2. Cloning process: Place the original remote and the copy remote close together, back to back. Press and hold one button on the original remote and the corresponding button on the copy remote at the same time for about 3 seconds. The LED will flash three times, then blink rapidly, indicating successful copying. Repeat for other buttons as needed. Compatible Models: HS1, HS2, HS4 868 HSE2 868 HSM2, HSM4 868 HSP4, HSP4-C 868 HSD2-A, HSD2-C 868 HSZ1, HSZ2 868 Digital D302 868 Digital D304 868 Digital D313 868 Digital D321 868 Digital D323 868 Command 131 868 BHS110, BHS121, BHS130, BHS140, BHS153, BHS211, BHS221 Note: This device does not support rolling code remotes. Package Includes: 1 x Remote Control 1 x Battery 1 x Keychain 1 x English User Manual