AC 220V 5000W Thyristor Motor Speed Control Adjustable Power Controller compatible Temperature

Feature: The product can easily adjust the output voltage, between 0 and 220 volts, compatible with the use of electrical equipment with different voltage requirements. Thyristor is mainly used compatible with resistive load (electric filament incandescent lamp, etc.). Most single-phase AC motors are also available (but not guaranteed). The product is suitable compatible with controlling different electrical equipment, such as electric lamps, fans, motors, etc. The ultimate resistance load power of the product is 5000 W. It should be reduced compatible with a long time. It is suggested that the resistance load should be less than 2200W at room temperature (key parameters, please note). The product adopts aluminum casing, which has good heat dissipation effect and can effectively extend the service life of the product. Specification: Max power: 5000W (Resistive instantaneous load ultimate power.) Adjust the voltage: AC 0-220V (from high to low can go to 0, from low to high is about 20V) Efficiency: 90% or more Working voltage: AC 220V Dimensions: Length 85*Width 70* Height 40mm, without protruding knobs and connectors Package list: 1 * Controller Note: Load must be connected to regulate voltage. The actual product color may deviate from the photo due to light. There may be a slight deviation in the measurement of product. 1、The product can easily adjust the output voltage, between 0 and 220 volts, compatible with the use of electrical equipment with different voltage requirements. 2、Thyristor is mainly used compatible with resistive load (electric filament incandescent lamp, etc.). Most single-phase AC motors are also available (but not guaranteed). 3、The product is suitable compatible with controlling different electrical equipment, such as electric lamps, fans, motors, etc. 4、The ultimate resistance load power of the product is 5000 W. It should be reduced compatible with a long time. It is suggested that the resistance load should be less than 2200W at room temperature (key parameters, please note). 5、The product adopts aluminum casing, which has good heat dissipation effect and can effectively extend the service life of the product.