Automatic alarm security system, DC12V 24V car remote start system for maintenance

RM239.00
+ RM41.49 Shipping

Automatic alarm security system, DC12V 24V car remote start system for maintenance

Sold by:
Automatic alarm security system, DC12V 24V car remote start system for maintenance

RM239.00

Save RM130.00 (35%)

RRP

RM369.00
In stock
+ RM41.49 Shipping

14-Day Returns Policy

Payment methods:

  • Brand: Unbranded

Product details

Product details

Automatic alarm security system, DC12V 24V car remote start system for maintenance

Features: 1. Sound and light alarm, emergency alarm function.2. Super lock induction function, no induction will be able to start the vehicle.3. High quality ignition wire, delicate and durable, ensures the stability of automobile power supply.4. Removable induction coil, easy installation, convenient for repair and maintenance, it is recommended to install under the steering wheel.5. Coil mold shape, strong and durable, passive ID sensor board, no battery, perfect anti-theft function, safe and reliable. Specifications: Features:Sound and light alarm, emergency alarm function.Super locked induction function, no induction will be able to start the vehicle.High quality ignition wire, delicate and durable, ensures the stability of the automobile.Power supply.Removable induction coil, easy installation, convenient for repair and maintenance; it is recommended to install it under the steering wheel.Coil mold forming, solid and durable, passive LD sensor board, battery-free, perfect matching anti-theft function, safe and reliable.Specifications:Condition: 100% Brand NewOperating Voltage: DC voltage = 12V, 24V power supply is temporarily unsupported.Standby Current: 8mA (Note: Standby up to 2 months continuously) 17 x 14.5 x 5 cm / 6.7 x 5.7 x 2 inchesPackage List:1 x Induction Coil1 x Wiring Harness1 x Main Unit1 x Start Button2 x ID CardsNote installation instructions:1. When the vehicle is equipped with a steering wheel lock, the key is inserted into the keyhole and pushed into the ACC gear to unlock the steering wheel. The original car's spark plug is then removed to prevent the original car's audio system from drawing power. 2.When the original vehicle has an anti-theft chip, remove the anti-theft chip from the original vehicle and stick this new product to an area where the original vehicle's system can be scanned. Failure to do so may result in a starting failure. 3. Since the base of the start button is metal, during gluing and installation, if there is interference with the car's original anti-theft chip, choose alternative areas for placement or use a high-quality adhesive.4.The output of this product consists of 5 lines, i.e.For example, original red wire connection for the fire alarm, original orange wire connection for the ACC (usually in 1-speed), original white wire connection for the ON1 power line (usually in 2-speed), original yellow wire connection for the fire alarm starting point (this line is powered at startup, no power after startup), brown wire connection for the original ON2 power line (this line is powered when the key is turned to the ignition position, and at startup when there is no power; at startup, there is power; the installer must be careful to determine this).5.When there are only 4 output wires for some models, only orange (ACC), white (ON), yellow (ignition start wire), and red (fire wire on the original car key head). The brown wire is either not used or not used.with white wire ON1.6.When you encounter several vehicles with 6 output wires, in addition to following the path of the fourth wire above, also discover the function of the sixth wire.The key in the ACC file, the ON file, and the startup file, in these three different states, detects the power supply to the sixth line. Therefore, the sixth startup line requires power, and the yellow startup line phase is connected, or the relay isolation is used. In the case of power to ON, connect the white line or use the relay isolation power supply. Keep this in mind; otherwise, starting the machine will be difficult.7.For the entire machine (with and without key start), it is important to remember that the ground wire must be firmly connected. The ground wire cannot be left connected for too long; otherwise, starting will be difficult, or the startup indicator light will turn off, and the foot brake will be engaged.All of this is because the ground wire is loose or the connecting soldering iron is faulty.8.Please note that the new and old types of this product will be sent randomly, and please ensure this is acceptable to you before ordering.
  • Fruugo ID: 530222750-1075998317
  • EAN: 4012914785412
Safety

Product Safety Information

Please see the product safety information specific to this product outlined below

The following information is provided by the independent third-party retailer selling this product.

Product Safety Labels

CE Mark
Safety Warnings: WARNING! TO AVOID DANGER OF SUFFOCATION,KEEP AWAY FROM BABIES ANDCHILDREN. DO NOT USE IN CRIBS/BEDSOR PLAY PENS.THIS BAG IS NOT ATOY.
Ingredients: Octinoxate 4.9%
Manufacturer Part Number: QK20268-28542
Model Number: QK20268-28542
Serial Number: QK20268-28542
Batch Number: QK20268-28542

Delivery

Delivery

Dispatched within 3 days

  • EXPRESS: RM41.49 - Delivery between Wed 30 September 2026–Thu 01 October 2026

Shipping from China.

Returns

Returns

We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items.

View full return policy