Features: CNC regulation of voltage and current, convenient and fast, industrial quality, high precision, can be directly used in engineering projects. It adopts professional power LCD, with clear interface, simple operation and nearly perfect protection mechanism. Hardware protection: input end anti reverse connection protection, reverse connection does not burn; Output end short-circuit protection, short-circuit does not burn; The output end is anti backflow, and there is no need to add another anti backflow diode when charging the battery. Software protection: over voltage protection(OTP), over current protection(OCP), over power protection(OPP), over temperature protection(OTP), input undervoltage protection (LVP). The default regulating voltage or constant current value can be set, which can be quickly adjusted in various applications. Voltage and current can be locked to prevent misoperation. Input voltage: DC6.0V-36V (below 4.7V, there is undervoltage protection LVP. It is recommended to use the input voltage higher than 7V. When the input voltage is lower than 7V, the output power will decrease. The lower the input voltage, the smaller the output power). Specifications: Material: ABS+PCB Input Voltage: DC6.0-36V Output Voltage: DC0.6-36V Output Current: 0-5.100A Output Power: 80W under natural heat dissipation Voltage Accuracy: 0.5% +1digit, resolution: 0.01V, factory calibrated accuracy Current Accuracy: 0.5% +3digit, resolution: 0.001a, factory calibrated accuracy Conversion Efficiency: About 88% Soft Start: Yes Input Reverse Connection Protection: Yes, reverse connection does not burn Anti Backflow at the Output End: Yes, it can be directly connected to the battery Output Short-circuit Protection: Yes, the output terminal can be directly short circuited Temperature Protection (OTP): Yes, 100 Working Frequency: 180kHz Item Size: 79 * 42 * 42mm / 3.11 * 1.65 * 1.65in Item Weight: 86g / 3.03oz Package Weight: 104g / 3.69oz Package Size: 10 * 6 * 5.5cm / 3.94 * 2.36 * 2.17in Packing List: 1 * Module