Feature: 100% and high quality. Dynamically monitor: This motorcycle tire pressure monitoring system dynamically monitors tire pressure and temperature, helps improve fuel efficiency, prolongs tire life, and enhances driver safety. Long battery life and safety: The Bluetooth-compatible external motorcycle TPMS sensors feature a long-lasting battery life of approximately 3 to 5 years. Easy operation via app: This Bluetooth TPMS supports Bluetooth 4.0 or higher and app operation. The tire pressure monitoring system is designed for smartphones and supports apps for iOS and Android devices. When performing a Bluetooth scan, the app may request location permission; please allow it, as this is required by the Android system for Bluetooth functionality. High accuracy: Real-time monitoring with 2 TPMS sensors, waterproof and corrosion-resistant design, anti-theft technology, suitable for use in rainy conditions. High sensitivity and reliable accuracy in measuring pressure and temperature. Easy setup: Installation can be completed in 3 simple steps within 10 minutes: 1. Remove tire valve caps and install anti-theft screws; 2. Install the external sensor onto the tire valve in the correct order; 3. Hold the sensor in place and tighten the anti-theft screw. Warning: Compatible with smartphones supporting Bluetooth 4.0 or higher. Not compatible with devices using Bluetooth versions below 4.0. (Due to variations in hardware performance among Android phone manufacturers, data transmission delays may occur, which is considered normal.) Product data is displayed on the smartphone. While driving, exercise caution when checking tire pressure and temperature on your phone. If tire pressure rapidly increases or decreases continuously, stop the vehicle and inspect the tire for damage. This product provides tire pressure and temperature readings but cannot prevent accidents caused by tire failure. It is recommended to use high-quality tires. Slight tire leakage resulting in gradual pressure loss over time is normal and unrelated to the installation of this product. External sensor installation: Each sensor has a unique ID code. Ensure each sensor is installed on the corresponding tire valve. Note: When tightening the sensor, open the app on your phone (select Auto Pair) and press the “Search” button simultaneously to complete the sensor pairing process quickly. Attention: Follow the markings and install each sensor on its corresponding tire. Keep the installation tools (screws and wrench) in the vehicle for future sensor installation or removal. After installing the sensors, check for any tire air leakage. Sensor specifications: Working voltage: 3V Working current: 100μA Standby current: ≤ 2.2μA Wireless working frequency: 2.4GHz Wireless transmitting power: 0dBm MAX Wait time: ≤ 5s Display: App Waterproof standard: IP67 Working humidity: 95% MAX Tire pressure detection range: 100–1300kPa Tire pressure detection accuracy: ±10kPa Tire temperature detection accuracy: ±3℃ Working temperature: -30℃ to +80℃ Storage temperature: -30℃ to +85℃ Battery capacity: 140mAh Battery life: 3–5 years Sensor weight: 8g ±1g App compatibility: TPMS app supports both Android and iOS operating systems, requiring Bluetooth 4.0 or higher. App installation: Option 1: Scan the QR code on the card to download and install the app. Pairing instructions – Recommended method: Scan code: Open the downloaded app, scan the code to pair with the corresponding sensor ID to complete the pairing process. Then install the sensor and wait for it to transmit data. Note: If data is not displayed after installation, drive the vehicle above 20km/h for 2–3km to activate data transmission. Package includes: 2 x External Sensor 2 x Screw 1 x Wrench 1 x User Manual 1 x Sensor ID