Functions: Made of high quality and durable plastic, and the metal expander, which is strong and not easy to break when working.Suitable for the dent of all kinds of flat metal, such as the surface of automobile metal plate.It saves you more time and you don't have to wait for the store's dent to be repaired.Manual expander can be used to repair car tires. Specification: Material: High quality and Durable Metal & PlasticColor: OrangeSize: As the picture Note: This product need to work with hot melt. Glue the pull-out tab to the recessed position and press it gently until the glue is fixed and then let go. Package Included: 1 x Expander2 x Glue Tabs Kit ( Glue is not included) About Others Car Dent Puller:Features: 100% new and high quality.It is made of aluminium alloy for strong strength and long durability.Used as a adapter for slide hammer or pulling tap for easy catching and pulling.A necessary component for dent repair, direct replacement for the broken one.Easy installation, the thread size is M10 for better application.Specification: Material: Aluminum AlloyColor: As the picture showType: M10Size: As the picture show How to use this paintless dent repair kits : 1.Clean the dent with a clean wet cloth; 2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue); 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 8. Clean the repaired place with a clean wet cloth.Package Included: 1pcs x Slide Hammer18pcs x Blue Glue TabsDo drop