1. Automatic Front View: When the Engine is Started, The System Activates the Monitoring Machine and the Front Camera to Check The Front View for 8 Seconds -The THEN THEN It off. 2. Automatic Rear View: When you put away in reverse, the system is attached by the monitor as the rear view carera. It then switches to the front view of the video careo in 15 selects, then stops. 3. The Front View Activates The Mode: Push The Control Switch to Enter the Front Mode. 4.in this mode, the system will monitor and action the front of the carera at all times. 5.exit the mode by presenting the control switch again.Working Priority: Rear View> Front View Specification: Power: MAX: 50mA, 12V. System Signal: PAL / NTSC Operating tempicular: -20-80 Description: FRONT View Camera: Presented by the remote control system. Rear View Camera: Submitted by the Control System or Can Be Activated by Reverse. packing list: 1*Camera blind spot Intelligent system rear view controller