40W LED Ceiling Light with Remote Control Light source: LED Material: Aluminum Acrylic Iron Dimming range: 10%-100% 10%, 50%, 100% Color temperature: 3000K, 4500K, 6000K (warm white / natural white / white) Power: 40W Luminous flux: 3620LM10% Voltage: 200-240V Lighting range: 15-40 Beam Angle: 120 Remote control sensing range: 3-5m Color Rendering Index: 80Ra Working Temperature: -2055 Lifetime: 30000H Certifications: CE ROHS IP Grade: IP40 Dimming function and remote control Most users do not know which color temperature (warm 3000K / neutral 4500K / cool 6000K) suits their rooms. You can choose your favorite color and the appropriate brightness (from 10% to 100%) with the remote control. [Remote control range <10 M]. Night Light & Timer The bedroom lamp dimmable has a night light function and a timer function ( light turns itself off after about the 60s ). As a night light, you can adjust the brightness by remote control below 10%. Eye protection and No-Flicker: the LED ceiling light provides you with the most natural lighting, and the acrylic lampshade would reduce light transmission, which can protect you and your child's eyes from glare. Turn ON Turn OFF Brightness Brightness - Color Temperature - Color Temperature Color Temperature Switching: 3000K/4000K/6000K Switch between 30%,50%, and 100% brightness Night Light Timer function: the light switches itself off after 60 seconds. Remote Control Manual: Note: Remote control model may differ from the picture. 1. Clear Press and hold the "ON" button (press and hold), power on until the indicator is blinking, then the password is cleared successfully. 2. Pairing Power on the light and press the "SETUP" button within 3 seconds until the indicator is blinking and then pairing is successful. Does this light have a memory function? Yes, turn off the light after 20s of power on, it will display the light when it was turned off last time. Use for a period of time & the newly purchased remote control buttons do not respond. Confirm whether the new battery has power; Is the remote control indicator light on when pressing the remote control? Re-pair the code (see the manual for the method) Why do l feel the light body keeps shaking after installation? Our products have undergone strict structural testing, please follow the installation steps strictly and install each screw in the corresponding position.