Item Type: Hybrid Connectors High-concerned Chemical: None Style: XLR male + XLR female Interface type: 3-core XLR male, 3-core XLR female Material features: The plug shell is made of thickened zinc alloy, and the connector is copper-plated gold. The tail is made of plastic. This plug adopts a side outlet design, and after assembly, it can also be adjusted at a small angle by rotating the tail part. It is very suitable for devices with limited back socket space. The diameter of the tail rubber sleeve is 3mm, compatible with 3.0-5.0mm wires. When the rubber sleeve is removed, the diameter is 7mm and compatible with 5.0-6.5mm wires. Product use: Suitable for making various XLR microphone cables and DMX cables. This model requires soldering. Product size: XLR male 52x19x19mm, XLR female 49x19x19mm Weight: XLR male 26.8g, XLR female 28.6g Color: Silver Material: Metal + Plastic Installation precautions: Since this plug uses a side outlet design, hold the tail plastic part and rotate it counterclockwise to remove the tail cover before tightening the plastic back shell. After tightening the plastic shell, adjust the desired angle and press the tail cover tightly into place. During assembly, always remove the tail cover first, make necessary adjustments, then tighten the shell. Failure to remove the tail cover before tightening may cause the internal wire to twist, potentially leading to wire breakage or detachment of the soldered connections. Package Contents: 1 set * Compact XLR Microphone Solder Adapter (Male + Female) Only the above package content is included; other items are not included. Note: Lighting reflections and differences in display screens may cause slight variations in the color of the item as seen in the picture compared to the actual product. Measurement allowance is +/- 1-3cm.