60 pieces connecting terminalsSpecifications: Material: Nylon PA6.6 flame retardant insulating materials Inner conductor material: copper nickel Rated voltage: 250 V Rated surge voltage: 4 KV Rated current: 32A Cross section (solid conductors and strands): 0.08 - 2.5 mm Cross section (flexible conductors): 0.08 - 4 mm Strip Length: 9 - 10 mm Wide Application: These compact terminal strips are ideal for constructing cables connected in parallel. lighting, building cables, communication systems and security alert systems. How to use: 1. Strip the cable jacket from 9 -10 mm. 2. Raise the lever to 90. 3. Insert the wires. 4. Push the lever down to close the clamps. Safety Tips: 1. Switch off the power supply before installation so that the cables are de-energized. 2. Given the As the copper spring is very elastic, it must be avoided that it catches your fingers when opening and closing the switch. orange lever. 3.Each connection terminal clamp has a test hole, Electric pen can be used. to check if the terminal is powered. Making it convenient for testing and maintenance. 2 holes (PCT-212: 2.1 x 1.3 x 1.5 cm) 30 clips 3 holes (PCT-213: 2.1 x 1.7 x 1.5 cm) 10 clips 5 holes (PCT-215: 2.1 x 2.7 x 1.5cm)