-40~110 Din Thermostat with Sensor High/Low Temperature 2 Alarm Relay NO NC COMMON Output 7A/250VAC AC90~260V Features: - Strong anti-interference ability, stable performance, simple circuit and high precision; the outer shell adopts a guide rail casing, which is easy to install and features a sleek appearance. - Includes adjustment and digital filtering functions. - Standard 2 relay output with contact capacity of 7A/250VAC. Specifications: - Power Supply: Operating voltage AC90~260V; power consumption less than 2W (other power supplies available upon request) - Measurement Accuracy: 0.5%FS - Measurement Range: -40~110 - Display: 0.36 inch high brightness red LED (other colors available upon request) - Operating Environment: -10~60°C (relative humidity below 80%) - Dimensions: 110 x 36 x 60 mm - Sensor Length: 1.5m Package Included: 1 x Din Rail Thermostat 1 x Sensor Code Table: TY1: Relay 1 Output Alarm Type 0: Upper limit alarm – when temperature reaches AL1, relay closes; (AL1-HY1), relay turns off 1: Lower limit alarm – when temperature reaches AL1, relay closes; (AL1+HY1), relay turns off 2: Upper and lower limit alarm – when temperature reaches AL1, relay closes; HY1, relay closes AL1: Relay 1 Action Value: -40.0~130.0 HY1: Relay 1 Return Difference: -40.0~130.0 TY2: Relay 2 Output Alarm Type 0: Upper limit alarm – when temperature reaches AL2, relay closes; (AL2-HY2), relay turns off 1: Lower limit alarm – when temperature reaches AL2, relay closes; (AL2+HY2), relay turns off 2: Upper and lower limit alarm – when temperature reaches AL2, relay closes; HY2, relay closes AL2: Relay 2 Action Value: -40.0~130.0 HY2: Relay 2 Return Difference: -40.0~130.0 SEC: Relay Action Delay Value: 0–999 seconds When relay AL1 or AL2 reaches operating conditions, action is delayed by SEC seconds. If set to 0, no delay occurs. LC: Temperature Deviation Correction Value: -20.0~20.0 (Display value = Measurement value + LC)