["Features:\r\nA direct replacement for faulty or damaged after market oil/water temperature gauge sensors.\r\nA Universal 1/8\" NPT oil / water temp sensor, temperature ranges from 0-150c / 0-300f This is a one wire sensor, one for the signal to the gauge the sensor is earthed through the thread when screwed into the engine/sandwich plate.\r\nSingle connection sensor (brass outer for case is earthed)\r\nTemperature reading range 0 - 150 Celsius\r\n1/8th NPT Male Threads\r\nRange 0~150c ( 0-300f )\r\nUniversal Fit on all Imported and Domestic Cars\r\nTemperature TO Resistance:\r\n37.8℃ — 450 ±45 Ohm\r\n104.4℃ — 46.6 ±2.3 Ohm\r\n100℉ — 450.0 ±45.0 Ohm\r\n150℉ — 158.20 ±15.82 Ohm\r\n200℉ — 64.30 ±6.43 Ohm\r\n250℉ — 29.25 ±2.93 Ohm\r\n300℉ — 14.96 ±2.25 Ohm\r\n\r\nSpecifications:\r\nThread:1/8 NPT\r\nMaterial:Metal\r\nColor:Gold\r\nSize:3.8cm\r\n\r\nPackage Includes:\r\n1pc x Oil/Water Temp Sensor\r\n\r\nThis universal sensor/sender is brand new. As for always we recommend professional installation and set-up. Some models may use a different thread or different wiring connection, please check and compare before you order."]