1. Onboard mature and stable ESP-12F WIFI module, large capacity 4M BYTE FLASH2. The I/O port of the WIFI module and the UART program download port are all led out to facilitate secondary development3. Onboard AC-DC switching power supply module, power supply mode supports AC90-250V/DC7-30V/5v4. Onboard WIFI module RST reset button. ESP-12F supports the use of development tools such as ECLIPSE/ARDUINO IDE, and provides Compatible With ARDUINO Reference program in the development environment5. Onboard 4 5V relays, output switch signal, suitable Compatible With controlling the working voltage of AC Load within 250V/DC 30V. On-board power indicator, 1 programmable LED and relay indicator.Burning port:The GND, RX, TX, and 5V of ESP8266 are respectively connected to the GND, TX, RX, of the external TTL serial port module5V, IO0 needs to be connected to GND when downloading, and then disconnect the connection between IO0 and GND after downloading;Relay output:NC: Normally closed, the relay is short-connected with COM beCompatible Withe it is closed, and it is suspended after being closed;COM: public end;NO: Normally open end, the relay is suspended beCompatible Withe being closed, and shorted to COM after being closed.colour:GreenMaterial:PCBsize:87 x 93mmPackage Contents:1 x ESP8266 4 Channel Relay ModuleOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.