Firepower Double Flushing Barbecue Spray Gun Welding Torch Lighter (Gas not included) (Orange)

MYR159.00
免费送货

Firepower Double Flushing Barbecue Spray Gun Welding Torch Lighter (Gas not included) (Orange)

  • 品牌: Unbranded

Firepower Double Flushing Barbecue Spray Gun Welding Torch Lighter (Gas not included) (Orange)

  • 品牌: Unbranded
建议零售价: MYR249.00
价格: MYR159.00
您节省了: MYR90.00 (36%)
由……售出:
MYR159.00
免费送货

有货

我们接受以下付款方式

描述

Features:100% brand new and high quality. Strong firepower, especially suitable for outdoor barbecue use. Small and lightweight, it is easy to carry outdoors. Metal body, thoughtful design, do not hurt your hands, please feel free to use it. This product is equipped with instructions and is easy to use, making it easy for your outdoor picnic entertainment. Specifications:Condition: 100% Brand NewMaterial: MetalColor: Orange, Gold (Optional)Size: approx. 15*9.6*3.8cm / 5.9*3.8*1.5inThe Correct Way to Inflate:1. Before inflating, use a small tool to hold the inflatable core, completely discharge the residual gas inside, and eliminate the pressure in the gas tank of the lighter;2. Press the aerated gas tank outlet vertically downwards, pressing for about 5 seconds each time, two or three times.3. Please wait for about 5 minutes after the inflation is completed. If there is still no fire after 5 minutes, please adjust the adjustment valve to a larger value. (note + direction)Gas Filling Method1. When refilling, there must be no Mars or fire around, so be sure to be safe. Never refill while smoking;2. Qualified butane gas should be used. Inferior gas may damage the lighter or reduce the service life;3. When refilling the normal model, please stand up the lighter, align the gas outlet of the gas bottle and cover the air inlet of the lighter, press it several times, keep it for about 2 seconds each time; if the gas cannot be filled, it may be steam. Excess air is left in the box. At this time, you can deflate the air. Use a small screwdriver to align the air inlet and deflate 1-2 times, then perform the air filling operation.4. When the sound is refilled, please loosen the air inlet screw cover with a flat-blade screwdriver and then follow the above steps. After the filling is completed, the screw cap can be flattened, not too tight; otherwise, the cover will not be dense and the cover sound will not be crisp, and the gas will escape. The hard-mounted vocal machine should be equipped with a special nozzle to refuel; 5, when the gasoline engine is refueling, the head cover should be opened, the movement should be pulled out and inverted, the outer sponge should be opened and the appropriate amount of gasoline should be added, and the gasoline should be infiltrated into the inner layer and covered. The outer sponge is then placed inside the casing;6. After all kinds of lighters are refueled, wait at least 1 minute to adjust the temperature of the newly charged gas to room temperature, and then ignite after the residual gas attached to the lighter is completely evaporated. If the ignition operation is performed immediately at this time, the residual gas on the outside of the lighter may be burned, posing an unnecessary danger. After refilling the gas, if the flame height is too high or too low when used, it is a normal phenomenon, and the flame height can be moderately adjusted.Method of Adjusting the Flame1. When using, as the gas content of the product decreases and the ambient temperature changes, the flame height will change to a certain extent. This is a normal phenomenon, you can adjust the flame height moderately;2. When used, the normal flame height should be adjusted; the windproof and straight-through lighters are 1.5-2.5 cm; the vocal, gasoline and open flame lighters are 2.5-4.0 cm;3. If you need to adjust the height of the flame, please use a flat-blade screwdriver to align the groove of the flame regulator; if the lighter itself has an adjustment ring, you can adjust it directly with your finger, and turn it clockwise in the direction of the (-) arrow. , adjustable low flame height; turn counterclockwise toward the (+) arrow to increase the flame height. Note: Rotate counterclockwise and cannot exceed half a turn on a normal flame height. Otherwise, it may damage the product;4. The gasoline lighter should control the flame height by adjusting the height of the ignition wick. If the flame height is too high, the wick can be cut with scissors. If the flame height is too low, the wick can be properly pulled out.Package list:1 * Torch Lighter (Gas not included)1 * Instruction ManualNote:1. Contains pressurized flammable gas, please keep away from children;2. Do not puncture or throw a lighter, do not throw it into the fire;3. Please use in a ventilated environment, pay attention to flammable materials;4, the direction of the fire is strictly prohibited towards the face, skin and clothing and other flammable substances, so as to avoid danger;5. When igniting, please look for the position of the fire exit, and press the ignition moderately. Different styles of lighters are ignited in different ways: divided into straight, side, and side; gasoline engine should quickly rub the wheel, and the sound machine uses the thumb to quickly rub the roller from right to left;6. When using, if there is any smog and other debris falling into the fire outlet, you should blow it in time to remove the sundries, otherwise it w
  • 品牌: Unbranded
  • 类别: 厨房
  • 颜色: style560
  • Fruugo ID: 316724796-704756743
  • EAN: 9780561453323

配送 & 退货

在 2 天内发货

  • STANDARD: 免费 - 之间的交付 周五 07 十一月 2025–周五 21 十一月 2025 - 免费

从 中国 送货。

我们会争取将您订购的产品按照您的规格完整地配送给您。不过,万一您收到不完整的订单,或收到的产品与您订购的不同,或者有其他原因让您对订单不满意,您可以要求全部或部分退货,您将收到相应产品的全额退款。 查看完整的退货政策

产品合规详细信息

请参阅下面概述的针对该产品的合规性信息。

以下信息由销售该产品的独立第三方零售商提供。

制造商:
以下信息概述了在Fruugo销售的相关产品的制造商联系信息。

  • Gao Lei
  • An Qing Shi Lei Yong Dian Zi Shang Wu You Xian Gong Si
  • Shop No. 3, Fenghuang New Village, Niubei Road
  • An Qing
  • CN
  • 246005
  • yangxou21@outlook.com
  • 15549384067

欧盟负责人:
以下信息概述了欧盟负责人的联系信息。该负责人是位于欧盟的指定经济运营者,负责有关销售到欧盟的相关产品的合规义务。

  • e Vatmaster Consulting GmbH
  • e Vatmaster Consulting GmbH
  • RaiffeisenstraBe 2 B11
  • Rodgau
  • DE
  • 63110
  • contact@evatmaster.com
  • 49 61062699873