1. Load the battery use and check whether the wires in the container have contact with the metal mesh, which is the key inspection step2. Put in the grass . It is suggested that the length of the grass is more than 5mm, which is more effective.Then tighten the lid.3. In the model and on the ground table, white latex is drawn and applied evenly, to start sprinkling grass 4. Press the surface of the platform with the negative electrode electrical connector, as as possible, and then use the grass planter to start spraying the grass 2-3cm from the platform.5. After the grass is finished, pour out the extra grass or use a model vacuum cleaner to suck it up.Trim the haystack with small scissors and a toothpick until it grows evenly.Material:Metal + Plasticcolour:BlackPackage Contents:1 x flocking machine (2 x 1.5V batteries not included)1 x small diameter grille1 x diameter grille1 bag x grass1 x brush1 x Planting Template Tool