Item Type: Floor Drain Ruler_x000D_ Material: Stainless steel_x000D_ Ruler Thickness: Approx. 1.6mm / 0.06in_x000D_ Size: Approx. 250 x 355 x 250mm / 9.8 x 14 x 9.8in_x000D_ The floor drain ruler can be used for splicing tiles of different shapes._x000D_ Style 1:_x000D_ 1. Use a pen to mark point A, point B, point E, point G on the tiles and connect them in sequence._x000D_ 2. Cut out the basic pattern tiles (3 triangular tiles) according to the figure, and do the seam treatment._x000D_ 3. Cut out four basic pattern tiles._x000D_ 4. The assembly is completed._x000D_ Style 2:_x000D_ 1. Use a pen to mark point A, point B, point E, point G on the tiles and connect them in sequence._x000D_ 2. Cut out the basic pattern tiles according to the figure, and do the seam treatment._x000D_ 3. Cut out four basic pattern tiles._x000D_ 4. The assembly is completed._x000D_ Style 3:_x000D_ 1. Use a pen to mark point A, point B, point G, point F on the tiles, and then connect them in sequence._x000D_ 2. Cut out the basic pattern tiles according to the figure, and do the seam treatment._x000D_ 3. Cut out four basic pattern tiles._x000D_ 4. The assembly is completed._x000D_ Style 4:_x000D_ 1. Use a pen to mark point A and point B on the tiles, take points 4cm / 1.6in on the BE line and the AG line, point E, point G, and then connect them in sequence._x000D_ 2. Cut out the basic pattern tiles (2 trapezoid tiles) according to the figure, and do the seam treatment._x000D_ 3. Cut out four basic pattern tiles._x000D_ 4. The assembly is completed.