Product features: 1, left and right analog rod, with RGB LED lights 2, LED light degree adjustable (level 3) 3, with double motor, double continuous function 4. The back cover is engraved with anti-skid texture 5, support six axis gyro function 6. Bluetooth connection 7, lighting mode: breathing lamp, RGB magic breathing lamp, constant light 8, LED color: red/orange/yellow/green/cyan/blue/purple /RGB slide specification Working distance: <10M Battery: 400mAh X 2 PCS Running time: 8-10 hours Charging time: 2 hours On-call time: 25 days Joycon switch: When the host is off, press the Pair button for 3 seconds to Pair. Press the Home/Capture key to connect back. Operation method and LED instructions: Wireless mode: 1. Plug the slide rail into the host and it can be used. Pull out the slide rail and automatically connect back to the host via Bluetooth 2. Press Pair for 3 seconds to Pair the device. Press the Home/Capture key to connect back 3. Others are the same as the original handle How to use the TURBO key 1. Press Turbo+ A (click) to enable consecutive sending of A. You do not need to hold down the Turbo+ A key to enable consecutive sending of A automatically. 2. Turbo+A(double click) : Press AND hold down Turbo (shock prompt is set successfully). 3. Hold down Turbo (for 5 seconds) or press Turbo+A(shock prompt). 2, T key stall adjustment function, 5shoots/s, 12shoots/s, 20shoots/s 1 T + - Decreases the TURBO speed 2 "T" + "+" increases TURBO speed Motor adjustment: Function is divided into 5 levels: 100%, 75%, 50%, 30%, off. (Default: 50%) 1 "T" + "rocker on" increase motor movement 2 "T" + "rocker down" reduces motor movement 3 adjustment is successful. The motor vibrates for 0.5 seconds Charging: Power off, charge, led4 lights flash slowly, full of LED, and the fourth light is long on A set of standard: left and right joy-Con handle + data cable + manual + color box