This Brake light camera Adopting the latest 1/3 Super CMOS chip Senor which have more color Image, Resolution up to 1920x1080P, 1000TVL to great vision at night. [No Built-in Brake Light Strip] Waterproof Nano Glue Sealing All electronic components are 100% immersed in nano waterproof glue With an IP68 rating and ready to brave the elements. This brake light camera outputs CVBS analog signal by default (CVBS signal is compatible with all devices). If your device is the latest Android radio/AHD monitor, you need to cut the small White wire. After cutting, the camera output AHD 1080P signal. We all know that pulsed voltages are present in the actual wiring of various vehicles. A pulse is a burst of current, voltage, or electromagnetic-field energy. In the actual circuit, a pulse may last from a fraction of a nanosecond up to several seconds or even minutes. Pulses can cause voltages to fluctuate up and down, very erratically, with transients of up to 35V, which can easily burn out the camera, so we have brought in a wide voltage range of 9-35V to extend the work of the camera.Rear View Camera Resolution: 1000TV Line Lens Material: Glass Power supply: DC9-35V Signal System: PAL Resolution: Default CVBS Signal Cut The Small White Line To AHD1080P Lens view angle: 130 degrees Image Sensors: 1/3 Color Super CMOS Parking line:With parking line Minimum lighting: 0.1Lux Features: IP68 Waterproof [Applicability] Compatible with following vehicles: For Largus (2012-Current) Dokker (2012-Current) Please check as much as possible to make sure the item is what you need. Color: As Shown Material: ABS Plastic Package Contents: 1* 3rd Third Brake Rear View Light Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.