1、It is very reliable in performance. This is due to the spacer‑type spool valve structure it uses. In addition to reliable performance, the product also has many other characteristics. Therefore, the K-series solenoid valve has a very wide range of applications. 2、In the structural design of the K-series solenoid valve, there is an automatic compensation function for seal wear. 3、It can meet the needs of large flow media. It has a larger flow capacity than the Q series solenoid valve. Therefore, K-series solenoid valve has become the choice of most users in the working medium with larger flow. 4、The K-series solenoid valve has a compact structure, and the base plate also uses a takeover structure, which makes installation and maintenance work more convenient. 5、The interface diameter is G3/8in, which can be used more than 1500 thousand times and is durable. Item Type: Pneumatic Solenoid Valve Material: Aluminium Alloy Model: K25DH-10 H Interface Diameter: G3/8in Pressure: 0.15-0.8mpa Reversing Time: ≤0.06s Maximum Allowable Commutation Frequency: 8Hz Drain Flow: 25cm³/min Ambient Temperature: -5-50℃ Medium Temperature: -5-50℃ Life: ≥1500 thousand times How to Use: 1. During debugging or power failure, manual operation can be used (manual switch "0" position is off, "1" position is on). 2. The inside and outside of the pipe must be cleaned during installation, and then the dust cap must be removed. 3. It should be disassembled and washed or lubricated when it is stored for a long time or when it is used for a long time or when the action is not flexible. 1 x Pneumatic Solenoid Valve 1 x Manual