HANTEK Oscilloscope Kit 2 Channel Handheld 110Mhz Bandwidth 250MSa/s Sampling Rate Touch Screen TO1112D AC100‑240V US Plug Item Type: Oscilloscope General Technical Specifications: Display Type: 7in TFT LCD screen diagonally Display Resolution: 800(horizontal) x 480(vertical) pixels Display Type: Point, Vector Waveform Brightness: Adjustable Grid Type: Solid, dotted, none Grid Brightness: Adjustable Screen Brightness: Adjustable Afterglow: 1s, 5s, 10s, 30s, infinite, off Standard Interface: USBHost, USBDevice Power Supply: DC100-240V, 50-60Hz; DC input 5V3A, 9V2A, 12V1.5A Power Consumption: Less than 8W Fast Charge: Support fast charge Battery: 2 x 3.7V built in rechargeable lithium battery 2600mAh surroundings: Operating Temperature: 0℃-50℃ Storage Temperature: -20℃-70℃ Humidity: ≤+104℉ (≤+40℃): Relative Humidity≤90% 106℉~122℉ (+41℃~50℃): Relative humidity≤60% Cooling Method: Convection Altitude: Operating and Non Operating: 3,000meter (10,000ft) Random Vibration: 0.31gRMS from 50Hz to 500Hz, 10 minutes per axes When Not Operating: 2.46gRMS from 5Hz to 500Hz, 10 minutes per axes Mechanical part: Oscilloscope Size(LxWxH): Approx. 248 x 176 x 54mm / 9.76 x 6.93 x 2.13in Level: Horizontal Scale Range: 2ns/div~100s/div1, 2, 5 steps Delta Time Measurement Accuracy: Single shot, sample mode Full Bandwidth: ±(1 sampling interval+100ppm×reading+0.6ns) ＞16 times average ±(1 sampling interval+100ppm×reading+0.4ns) Sampling interval = seconds/div ÷ 200 Vertical: AD Converter: 8 Bit resolution, simultaneous sampling of each channel Oscilloscope Vertical Scale Range: 10mV/div~10V/div at input BNC Vertical Resolution: 8bit Vertical Sensitivity Range: 10mV/div~10V/div Offset Range: ±1Vmaximum(100mV/div) ±10Vmaximum(1V/div) ±50Vmaximum(10V/div) Dynamic Range: ±5div (8bit) DC Gain Accuracy: ±3% FullScale Channel to Channel Isolation: 40dB, DC to the maximum rated bandwidth of each model Note: Bandwidth reduced to 6MHz when using X1 probe Collection: Sampling Rate Range: 250MSa/s Acquisition Modes: Normal, average, peak, high resolution Waveform Interpolation: (sinx)/x Single Sequence: Acquisition Mode: Acquisition stop time Normal, Peak Detect: Single acquisition for all channels simultaneously Average: All channels are collected N times at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256 Storage Depth: 8Mpts Trigger: Mode: Auto, normal, single Level: CH1 CH2 ±4 divisions from the center of the display Holdoff Range: 8ns~10s Trigger Level Accuracy: CH1 CH2 Trigger Sensitivity: ±0.87div(2mV/div) ±0.78div(5mV/div) ±0.69div(10mV/div) ±0.52div(20mV/div) ±0.47div(50mV/div) ±0.26div(100mV/div) ±0.26div(200mV/div) ±0.47div(500mV/div) ±0.26div(1V/div) ±0.26div(2V/div) ±0.26div(5V/div) ±0.26div(10V/div) Edge Triggered: Slope: Rising edge, falling edge, double edge Data Source: CH1/CH2 Pulse Width Trigger: Polarity: Positive, negative Conditions: <, >, !=, = Data Source: CH1 CH2 Pulse Width Range: 8ns~10s Video Trigger: Signal Standard: NTSC, PAL, HDTV720p, HDTV1080p, HDTV1080i Data Source: CH1~CH2 Sync: Scan line, line count, odd field, even field, all fields Slope Trigger: Slope: Rising, falling Conditions: <, >, !=, = Data Source: CH1 CH2 Time Range: 8ns~10s Timeout Trigger: Data Source: CH1/CH2 Polarity: Positive, negative Time Range: 8ns~10s Enter: Number of Channels: 2 Analog channels Input Coupling: DC, AC or Ground Input Impedance: 1MΩ±2% Input Capacitance: 18pF±3pF Probe Attenuation: 1X, 10X Support Probe Attenuation Coefficient: 0.01X~10000X