REFLECTIVE TAPE CONTOUR SELF-ADHESIVE - HONEYCOMB 5 meters long WIDTH 5 cm BY POLYTAPE HIGHPOWERTAPE Suitable for marking various types of vehicles and items: TIR semi-trailers Tractor units Agricultural and cargo trailers Fences Advertising banners Tow trucks Gates Bikes Warning poles THE TAPE HAS A VERY WIDE APPLICATION Reflective contour marking of vehicles is one of the most effective ways to increase the visibility of cars, not only trucks. When choosing the material, remember that it should have the appropriate optical parameters, which guarantees the visibility of the vehicle parked on the roadside, turning on and participating in traffic. In favorable weather conditions, the reflective marking ensures the visibility of the vehicle even from a distance of 1000 m. Thanks to the 5M contour tape of the PL-1395 series, you will be visible in all conditions. DIMENSIONS: WIDTH - 5 cm LENGTH - 5 meters The tape is made in a new technology based on the invention of materials based on a prism (pyramid). In the prism technology, the light entering the prism is reflected and 80% returns in the direction from which it comes, even with a large variety of directions of the incident light, which ensures visibility at a large angle and over a long distance. The material used in the production of these tapes is polyester with a layer of adhesive activated by pressure, secured with paper tape. These tapes are used on trucks and trailers and on other rigid surfaces. Product advantages: easy application without the need to seal the edges unique, single-layer construction prevents delamination, peeling, penetration of water and dirt resistant to weather conditions, impacts, tears, abrasion, pressure washing, resistant to various types of chemicals good performance over a wide temperature range the thin structure of the tape makes it easy to apply it even on bulges, welds, rivets or bends comes with a paper liner that must be removed before applying the tape the material used ensures the highest level of reflection from long distances, reducing the risk of an accident at night and in poor visibility Usage: Before sticking the tape, the substrate should be cleaned of dust, dirt and other contaminants by washing the surface with available cleaning agents. If necessary, degrease the surface. The tape should be stretched on the substrate and then pressed against it, preferably with a rubber roller or a cloth. ONLY NOW AT A GREAT PRICE. CURRENT OFFER WHILE STOCKS LAST.