Description: This rhinestone applicator wand is a small portable tool with 7 tips for a variety of DIY decoration applications. It only needs 2-3 minutes of pre-heating, then you can set the rhinestones in place. In addition, the non-slip handle is very humanized, giving you a comfortable experience. Characteristics: 1 . Compact size, easy to carry. 2 . 7 brass tips for different applications at any time. 3. It only needs 2-3 minutes of preheating, easy to use. 4. Built-in temperature controller, no need to adjust the temperature. 5. With switch, convenient to control and operate. 6. Non-slip handle, comfortable and humanized. 7. Apply rhinestones, crystals, pearls to T-shirt, dresses, veils, headwear, mobile phone, computer, gloves, shoes, handbag, household items and other decorative items. 8. Perfect for projects like fabrics, embroidery, quilts, etc. Technical data: Material: ABS shell + brass tip Power: 10-12W Voltage: 110-240V (EU Plug) Violet colour Size: 18.5x4.5cm/7.09''x1.77'' Cable Length: 123cm/48.43'' 7 tips: 2mm (SS6), 3mm (SS10), 4mm (SS16), 5mm (SS20), 7mm (SS34), 9mm (TOP), HOT SPOT Package weight: approx. 176g Direction of use: 1 . Connect the applicator tip and turn it on. Leave for about 2 minutes. 2 . With the stone facing up, place the tip over the stone and lift it up. 3. Watch the glue until it starts to look wet and shiny. Now the stone is ready to be applied to the surface. It will take about 5 seconds and more, depending on the size of the rhinestones. 4. Lightly press the applicator at a 90-degree angle to the surface. Move the applicator up and to the side. If a stone is stuck in the tip, use tweezers to push down through the slot in the tip to remove the stone. 5. If the stone has not bonded properly, place the tip over the stone for a few seconds to melt the glue again. The package includes: 1 x Hot Fix applicator wand 1 x Handle 7 tips Note: 1 . We will provide you with an adapter according to different country standard and ensure its normal use. 2 . 3.