Rated wind power 600W/12V,800W/24V,1000W/48V Rated PV power 1000W/12V,1500W/24V,2000W/48V Product Introduction This kind of wind & solar hybrid charge controller is special designed for small off-grid wind generation and solar hybrid system. Appearance is elegant, operations are easy. It also makes the course of which wind generator and solar panels charge to batteries safely and efficiently. Functions and Features Wind generator MPPT boost charging function,improved charge efficiency . External dump load resistant to strong wind,work more stable . Solar MPPT chargeSolar intelligent disconnect charginghigh efficiency charge. Bluetooth function can monitor the system information by the app on the app on the phone(Only for Android). Dual power supply function: Battery + solar power supply. LCD displays parameters such as voltage and current of wind, solar and load .Some parameters can be set by users. DC output with 3 output modes. Battery module type can be selected and parameters can be set The controller has a built-in dust net, which is easy to replace and clean, ensuring the service life of the controller. The inner circuit board of the controller is sprayed with conformal coating to prevent dust, moisture and static electricity Reversed charging Protection of solar Such as at night, the voltage of the battery may be higher than solar panel. The controller protect the battery from charging the solar panel. Reverse polarity Protection of battery When the battery polarity is reversed, the controller does not work and there is no display. The fuse protects the internal circuit.If the battery does not work properly after it is connected correctly, just need to replace the fuse . Battery open circuit Protection After long-term use, the battery may be Open-Circuit or poor connect. The controller can protect itself from damage.Check the connection regularly Over voltage Over current Over load voltage When its strong wind or over voltage, the controller will automatically start braking function to protect the wind generator and battery. The controller will automatically cuts off the circuit when the output is over voltage. Lightning Protection Lightning protection refers to the last level of protection necessary for equipment. For lightning-prone areas, special lightning protection devices and other components of the multilevel lightning protection system are needed. It need additional payment If the user need this function.