I2C/SMBus Communication Module with USB Interface for Debugging and Easy Integration

CP2112 highly integrated USB to SMBus bridge controller integrates a USB 2.0 full-speed function controller, USB transceiver, oscillator, and 8 GPIO pins. Using a simple GUI-based configuration tool, all customization and configuration options can be selected, eliminating the need to develop complex firmware for standard HID class devices. Supplied with software and drivers, the CP2112 enables fast USB connectivity with minimal development effort. 1. USB bus powered: 4.0 to 5.25V 2. Self-powered: 3.0 to 3.6V, I/O voltage: 1.8V to VDD 3. Operating temperature range: -40°C to 85°C 4. On-chip reset circuit and on-chip voltage regulator with 3.45V output 5. Complies with USB specification 2.0, full-speed (12 Mbps) 6. Supports USB suspend state via SUSPEND pin 7. Integrated 194-byte one-time programmable ROM for storing customizable product information 8. 512-byte SMBus data buffer with configurable clock speed and 7-bit device address (slave mode) 9. HID to SMBus library for Windows, Mac, and Linux for rapid application development; API and open interface specification available 10. 8 GPIOs configurable as input/output, open-drain, or push-pull for external device control; configurable clock output from 48MHz to 94kHz; supports LED toggle via SMBus read/write operations 11. Applications: portable controllers, USB dongles, data logging devices Material: Plastic and metal Color: Purple Package Contents: 1 x Module 2 x Row pins Note: Light reflection and differences in display screens may cause slight variations between the color of the item in the image and the actual product. Measurement allows an error of +/- 1-3 cm.