Compliant with Serial specification, compliant With Serial 1.0 specification, compatible With Ultra 100/133 Data transfer rate up to 1.5 Gbps (150 MB/s), support IDE drive size larger than 240GB Support for Windows 98/98SE/ ME/ 2000/ XP/Win7/Win10, for OS 8.6 and above Support the Serial transfer rate of 1.5Gb/s (150MB/s) No driver is needed, the mini board size, no space wasted Specifications: Item Name: IDE to SATA/SATA to IDE Adapter Interface: 40pin IDE /SATA/4Pin Connection : The conversion card's IDE , plugged into the motherboard IDE interface; SATA data cable (delivery) one end plugged into the conversion card, the other end connected to the SATA hard disk; The conversion card is connected to the power cable (delivery), the other end of the power cable is connected to the chassis power cable; SATA hard drive power conversion , then the chassis power supply, so the connection is good, you can the computer power. If the installation is still not recognized SATA hard disk, you should check in the above installation steps and connections, and note the following: This conversion card is inserted in the motherboard IDE interface, the motherboard IDE is not the space with the card IDE prominent position on the. Due to the conversion card's IDE interface is slightly smaller than the hard- interface, so pay attention to whether the motherboard IDE's should be plugged in, may be staggered in a row. Check the BIOS is set to automatically identify the hard disk device IDE interface, if not set to enter the BIOS settings. Material: plastic colour: red Package Contents: 1 x IDE to SATA converter 1 x SATA Cable(Note: Random color, 't accept the specified color.) 1 x converter cable Only the above package content, other are not included. Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.