Feature: 1. Stepper motor and its driver integration, stepper motor set. 2. Compact and lightweight for efficient automation. 3. Integrated designed, no required for external motor cable, encoder cable, driver. 4. Achieve simplified system structure, save space and reduce interference. 5. Low vibration, low noise, low temperature rise, long service life. Specification: Item Type: Stepper Motor Step Angle: 1.8° Holding Torsion: 2.2N.M Driving Voltage: DC 24-50V Current Range: 1.5-5.6A Phase Number: 2 Phase The Highest Segment: 12800 Steps / Turn Control Method: Pulse Control. Package List: 1 x Stepper Motor Note: 1. When the driver is powered on, the indicator PWR is on. When the drive is powered off or the drive is faulty, the light is off.2. Do not reverse the power supply. Do not exceed the input voltage of DC24V.3. When installing the motor, it is strictly forbidden to strike the motor shaft and the back cover to avoid damage to the encoder.4. The input control signal voltage is 5V. When it is higher than 5V, the current limiting resistor needs to be connected. When the control signal voltage is 24V, it is necessary to connect 2.2K 1/4 resistors in series.