Infinite Cycle Relay Module ON OFF AC 100-250V Delay Timer Module

Features 1.Suitable for reciprocating stroke control, or repeated on and off of equipment and product aging test. 2.Wide voltage input, support AC 100-250V input. 3.Low power consumption of the control board, less than 1W. 4.Infinite cycle power on / off module, delay time can be adjusted separately. 5.Active output, the output voltage is the same as the input voltage. Do not exceed 10A. Specification Item Type: Relay Module Voltage: AC 100-250V Power Consumption: <1.0W Output: Active output, the output voltage is the same as the input voltage. Do not exceed 10A. Life: 100,000 operations Wiring Terminal: <--Live wire into the mains L line (Live wire) input <--Neutral wire into the mains N line (Neutral wire) input -->N line is connected to load N line, most appliances do not need to strictly distinguish LN line -->The live wire is connected to the load L wire. Most appliances do not need to strictly distinguish the LN wire. -->Normally closed end of the L wire output of the live wire normally closed terminal, generally need not be connected. Instructions: Time can be set under power on and power off First determine the range and unit of the delay. The two DIP switches control the on-time and off-time at the same time. They are shared. The first bit of the DIP switch is used to set the adjustment range. The OFF position is 0-10 and the ON position is 0-1000. The second bit of the DIP switch is used to set the time unit. The OFF position is seconds and the ON position is minutes. Package List 1 x Relay Module