Feature: 1. Single‑phase input 220V ,3phase output 380V, frequency is 0‑50hz/60hz. 0.5‑400hz. 2. Simple to use, just connect L1/L2 to any two of VFD input R/S/T. 3. Used in conjunction with the for Mach 3 controller, it can be used as a motor speed control and phase converter. 4. This product can use sine waving PWN (SPWM) for the control system. 5. No experience in driving VFD, please refer to the instructions before operating the VFD. Specification: Item Type: Inverter Material: ABS Matching Motor Power: 2.2KW Model: GT-2R2G-2T Single Phase Input: 220V Three-phase Output: 380V Control Way SPWM Input power 220V 5-digit digital display and status indicator Display frequency, current, speed, voltage, counter, temperature, forward and reverse status, fault, etc. Communication control RS-485 Operating temperature -10~40℃ humidity 0~95% relative humidity (no condensation) vibration Below 0.5G Frequency control Range 0.5~400.00Hz Accuracy Digital type: 0.01% (-10-40℃); analog type: 0.1% (25±10°C) Set the resolution Digital: 0.01Hz; Analog: 1% of the maximum operating frequency Output resolution 0.01Hz Keyboard setting method Can be set directly with ←∧∨ Analog setting method External voltage 0-5V, 0-10V, 4-20mA, 0-20mA. Other functions Frequency lower limit, start frequency, stop frequency, three jump frequencies can be set separately General control Acceleration and deceleration control Acceleration and deceleration time (0.1-6500 seconds) arbitrary choice V/F curve V/F curve can be set arbitrarily Torsion control The torsion can be set to increase, the maximum 10.0% start torsion can reach 150% at 1.0Hz Multi-function input 6 multi-function input terminals, realize 8-stage speed control, program operation, 4-stage acceleration/deceleration switching, UP, DOWN function, counter, external emergency stop and other functions Multi-function output There are 5 multi-function output terminals, which can realize the indication and alarm of running, zero speed, counter, external abnormality, program running, etc. Other functions Automatic voltage regulation (AVR), deceleration stop or free stop, DC brake, automatic reset and restart, frequency tracking, PLC program control, traverse control, adjustable carrier, up to 20KHz, etc. Protective function Overload protection Electronic relay to protect the motor, driver (constant rotation short 150%/1 minute, fan 120%/1 minute) FUSE protection FUSE melts new, the motor stops Overvoltage 220V line: DC voltage> 400V; 380V line: DC voltage> 800V Undervoltage 220V line: DC voltage <200V; 380V line: DC voltage <400V Restart after instantaneous power failure After Shun stops, it can be restarted in frequency tracking mode Stall prevention Stall prevention during acceleration/deceleration operation Short circuit at output Electronic circuit protection Other functions Heat sink overheating protection, reverse rotation limit, function parameter lock for direct start after power-on and fault recovery, etc. . Package List: 1 x Inverter1 x User Manual Note: 1.This VFD is ONLY applicable to three phase 110V asynchronous motor2.Dont support external resistor(the function needs to be customized by notifying the seller before purchase).3.Fan runs all the time even though the motor stop.4.If your motor is 50/60hz, you need to change the for Hertz parameter of the VFD to be consistent with the motor