Original LCD Screen and Digitizer Full Assembly for Fitbit Versa 2 Before Installation Notes Tip 1: Test before installation When testing, do not remove any protective film or tags. Pay attention to static electricity. Before attempting any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent static damage to internal components. Wear eye protection and handle glass carefully to avoid injury from splinters. Tip 2: Simulate testing Screen replacement is a fragile product. Testing before full installation is strongly recommended. Simulate testing by connecting the motherboard to the new LCD/screen assembly with the audio cable, then power on to verify function. If the test is successful, proceed with installation. If there is no display, contact support immediately. Do not force installation if the screen does not work. No responsibility is assumed after installation. Tip 3: Avoid cable over-bending Do not bend the LCD cable beyond 90 degrees. Excessive bending may cause black display issues. Product Information 1. Replacement LCD screen and touch screen digitizer assembly for Fitbit Versa 2 2. Replace damaged or non-functional screens with a new unit 3. Restore your devices appearance and functionality 4. Designed for precise fit and full compatibility 5. Each unit is inspected and confirmed in good condition prior to shipping 6. Professional installation is highly recommended. No responsibility is assumed after installation