1、Perfect Fit: The LED kit is only compatible for Xbox One One S, controller (model 1708), not compatible for Xbox One Elite controllers. 2、Fixed Single Color And Single Color Slow Flash: The LED kit has multiple colors, such as blue, green, red, pink, light blue, purple, yellow and white. 3、Multiple Modes: Cyclic fast flashing, cyclic breathing flashing, cyclic fading. 8 kinds of flashing colors, 19 kinds of light change mode. 4、Easy to Use: This LED light board does not need to be soldered, it can be used by pasting. 5、Notice: If the light is dim, or even does not work, please replace the battery with a new one, or try again with a fully charged battery. 1 x Light Board 1 x Light Board Connection Cable 1 x Cross Key 2 x Mushroom Cover4 x Button 1 x Menu Key 1 x View Key 8 x T8 Screws 12 x T6 Screw 1 x T8 Screwdriver 1 x T6 Screwdriver 1 x Plastic Pry Bar 1 x Plastic Tweezers 1 x Manual  Item Type: LED KitMaterial: PCBAApplicable: For XBOX ONE SOperation Method: Turn on and off the LED light board: press and hold the "View button + Menu button" for 5 seconds.Set LED light board: press and hold "View key" for 5 seconds, when "View key" and "Menu key" white LED light flashing means enter setting mode.In the setting mode, press the "Menu key" of the handle to change the light mode.Hold down the "View key" for 5 seconds to lock the mode.Parameters: 1. Easy to install, open your controller, paste and insert, no need to solder. Push button control, easy to operate. 2. Includes clear d-pad, thumbstick, start, return and ABXY buttons. Also comes with a complete tool for removing the controller.