Description 110w High Power Lamp Tubecan Quickly Dry All Kinds Of Gluegive You A Better Nail Experiencethe Bottom Of The Lamp Can Be Removed,can Be Used To Dry Hands Or Wipe Nail Polish On Feetoperation Manual (1) Connect The Ac Input Cable. (2) The Indicator Light Is On When The Power Switch Is Turned On. (3) Tap The Corresponding Button To Set The Relevant Time. (4) When You Press The Button For 30s, 60sand Run The Timer At Full Power,when The Hand Enters The Machinethe Infrared Sensor Will Start Automatically,automatically Turn Off When The Timer Expires Or The Hand Leaves (5) If You Press The Switch Button,the Timer Runs At Full Power,not Controlled By Infrared Sensors,the Machine Will Automatically Shut Down After 60 Seconds. preventive Measures (1) Please Read The Instructions Carefully Before Use. (2) Please Use It Correctly (4) If The Timer Button Does Not Work,please Don't Use It. (5) Please Unplug The Ac Input Cord When Leaving The Machine. (6) If The Ac Input Line Fails,do Not Use Nail Art Lamps. (7) Please Do Not Power On For More Than 600 Minutes.otherwise, The Life Of The Nail Lamp May Be Shortened.