Newest LED Car Hood Light With Turn Signal Scan Starting DRL Dynamic Daytime Running Lights Auto Decorative Ambinet Lamp 12V Describe: -Product name:Start-up scanning car hood light with trun signal - Light source: LED - Driving light colors: white/ice blue/blue/red - Turn signal color:yellow - Voltage: 12V - Length: 120cm/150cm/180cm/200cm/220cm/240cm Feature: - Newly designed start-up scanning car decorative hood lights with trun signal function - Use high brightness light beads for brighter illumination Installation tips: - How to install the light strip 1. Apply double-sided tape to the two inner sides of the cover. 2. Fix the light bar on the double-sided tape. 3. Note: The cable position should be close to the windshield side, not close to the end of the central grille, otherwise it will affect the wiring and the normal opening of the hood. - How to connect the wires? The yellow line is connected to the left turn signal lamp, and the yellow extension line is connected to the right turn signal 1. The black wire is connected to the negative pole + the red wire is connected to the ACC = the engine starts to light up. 2. The black wire is connected to the negative pole + the red wire is connected to the DRL = turn on the DRL to light up. 3. The black wire is connected to the negative pole + the red wire is close to the light = the low beam is turned on. 4. The black wire is connected to the negative pole + the red wire is connected to the highlight light = the highlight light is turned on. Notes: 1. Please allow 0.5-1 inch difference due to manual measurement. (1 inch = 2.54 cm). 2. Due to different computer screens, the actual color may be slightly different from the product picture, thank you for your understanding